Weboldalunk használatával jóváhagyja a cookie-k használatát a Cookie-kkal kapcsolatos irányelv értelmében.

Volfrám elektróda WL15 (arany) 2,4x175mm GCE-Plansee(oszták) 400P924175 Akciós!

749 Ft
637 Ft (502 Ft + ÁFA)
Kedvezmény: 15%
Menny.:db
Legkisebb rendelhető mennyiség: 10!
Nem értékelt
Cikkszám: 115007
Szállítási díj: 1.638 Ft
Várható szállítás: 2021. január 29.
Elérhetőség: 1886 db raktáron
Kedvező árak
Kedvező árak
Gyors kiszállítás
Gyors kiszállítás
Garancia
Garancia
749 Ft
637 Ft (502 Ft + ÁFA)
Kedvezmény: 15%
Menny.:db
Legkisebb rendelhető mennyiség: 10!

Leírás

1,5% Lantán tartalmú volfrám elektróda a Plansee oszták gyárból.
ld.:
https://www.plansee.com/shop/en/product/standard-products/tig-electrode/wl15-(goldplus-)-electrode-2-4-x-175-mm-11015425
WL15 (GOLDplus®) electrode Ø2,4 x 175 mm
colour: GOLDplus®

Lantán elektróda, univerzálisan alkalmazható közel minden AVI/TIG eljárásnál.

ötvözetlen acélok
magasan ötvözött acélok
alumíniumötvözetek
titánötvözetek
nikkelötvözetek
rézötvözetek
magnéziumötvözeteknél.
A lantán elektródák felülmúlják a cériumos elektródákat az alacsony áramtartományban, ami azt jelenti, hogy a lantános elektródák a legjobb választás.

Ötvöző tartalom:

97.80% volfrám
1.30 – 1.70% Lantán
0.5% Egyéb

WL15 (GOLDplus®) electrode Ø2,4 x 175 mm
colour: GOLDplus®

QUALITY / FINISH
pickled:

Uniform matte appearance, free from impurities as a result of a chemically cleaned surface. Pickled surfaces exhibit increased emissivity. This means, for instance, that lower heating temperatures can be achieved in high-temperature applications while maintaining the same radiant power. Furthermore, the pickled surface should be preferred for all standard applications in which a bright finish is not absolutely necessary. It is the least expensive variant.
ground:

The appearance of ground sheets falls between that of bright and pickled sheets. They have a satin-like finish. The ground surface is a less expensive alternative to the bright surface and is suitable for all standard applications. It is possible to work to very narrow tolerances with rods that have a ground surface.
bright:

The mirror finish is visually appealing and exhibits a high level of reflectivity that can be of interest for certain applications (e.g. reflectors).
forged:

The marks of forging can still be seen. Matte appearance as a result of chemical cleaning. Least expensive surface finish: Can be used, for instance, in the glass industry with the benefits of reduced wear compared with machined surfaces.
turned:

Turned, uniform surface with a matte appearance. A measurable surface roughness and tolerances in the range of tenths of a millimeter are achieved.
electropolished:

Bright appearance. More material removed, resulting in reduced roughness; free from any impurities.

Ismertető

1,5% Lantán tartalmú volfrám elektróda a Plansee oszták gyárból.
ld.:
https://www.plansee.com/shop/en/product/standard-products/tig-electrode/wl15-(goldplus-)-electrode-2-4-x-175-mm-11015425
WL15 (GOLDplus®) electrode Ø2,4 x 175 mm
colour: GOLDplus®

Lantán elektróda, univerzálisan alkalmazható közel minden AVI/TIG eljárásnál.

ötvözetlen acélok
magasan ötvözött acélok
alumíniumötvözetek
titánötvözetek
nikkelötvözetek
rézötvözetek
magnéziumötvözeteknél.
A lantán elektródák felülmúlják a cériumos elektródákat az alacsony áramtartományban, ami azt jelenti, hogy a lantános elektródák a legjobb választás.

Ötvöző tartalom:

97.80% volfrám
1.30 – 1.70% Lantán
0.5% Egyéb

WL15 (GOLDplus®) electrode Ø2,4 x 175 mm
colour: GOLDplus®

QUALITY / FINISH
pickled:

Uniform matte appearance, free from impurities as a result of a chemically cleaned surface. Pickled surfaces exhibit increased emissivity. This means, for instance, that lower heating temperatures can be achieved in high-temperature applications while maintaining the same radiant power. Furthermore, the pickled surface should be preferred for all standard applications in which a bright finish is not absolutely necessary. It is the least expensive variant.
ground:

The appearance of ground sheets falls between that of bright and pickled sheets. They have a satin-like finish. The ground surface is a less expensive alternative to the bright surface and is suitable for all standard applications. It is possible to work to very narrow tolerances with rods that have a ground surface.
bright:

The mirror finish is visually appealing and exhibits a high level of reflectivity that can be of interest for certain applications (e.g. reflectors).
forged:

The marks of forging can still be seen. Matte appearance as a result of chemical cleaning. Least expensive surface finish: Can be used, for instance, in the glass industry with the benefits of reduced wear compared with machined surfaces.
turned:

Turned, uniform surface with a matte appearance. A measurable surface roughness and tolerances in the range of tenths of a millimeter are achieved.
electropolished:

Bright appearance. More material removed, resulting in reduced roughness; free from any impurities.

Vélemények

Erről a termékről még nem érkezett vélemény.
Írja meg véleményét!

Facebook kommentek