AVI/TIG hegesztőpálca alumínium ötvözetekhez

Hegesztőpálca AVI/TIG alumínium  AlMg5 (ER5356) 3,2x1000mm 5kg/csomag.  A termékek műbizonylattal rendelkeznek. Kérésre mellékeljük, vagy e-mailben rendelkezésre bocsájtjuk.

Alloy 5356 is an all position non-heat treatable TIG wire used to weld the 5XXX series alloys when 40,000 psi tensile strength is not a requirement. Alloy 5356 is a very good all purpose wire so it is the most widely used of all aluminum fillers metals.

Typical Application:  Common applications are welding of boats / ships, bicycles, tanks pressure vessels and automotive parts.

Chemical Composition AWS Commercial Specification

Si - 0.25%

Fe - 0.4%

Cu - 0.1%

Mn - 0.05-0.2%

Mg - 4.5-5.5%

Cr - 0.05-0.2%

Zn - 0.1%

Ti - 0.06-0.2%

Al - Rem%

Others - 0.15% AWS A5.10; ASME SFA 5.10; ISO 18273 UNS-A

5%-os, szilicium tartalmú alumínium hegesztő pálca,mely kiválóan alkalmas alumínium és alumínium öntvények AVI(TIG) hegesztéséhez.Az egyik legelterjedtebben alkalmazott hegesztőpálca.

 Általában AlMgSi illetve AlSi ötvözetekhez használják, 7% szilíciumtartalomig.

 A szilícium ötvözésnek köszönhetően a varratfém könnyen kezelhető (jó nedvesítő hatás).

 A varrat nem repedésérzékeny, felülete pedig fényes, majdnem tökéletesen kormozódásmentes.

 Eloxálása (anódos oxidálása) nem ajánlott. Nem hőkezelhető.

Synergic

Typical composition in %

Si <0,25

Fe <0,40

Cu <0,05

Mn <0,05

Mg <0,05

Zn <0,07

Be <0,0003

Ti 0,10-0,20

Others <0,03

Al min. 99,50

Classification

EN ISO 18273  :  S Al 1450 ( AI99,5Ti )

Matériel Nr  :  3.0805

Base materials

See table

Remarks

Welding of pure aluminium requires special precaution due to the narrow melting range in order to prevent hotcracking and porosity. This alloy replaces ML 1050. Consider the technological application reference.

Physical properties (Approx. values)

Electrical conductivity [S*m/mm2]  :  min.35

Heat conductivity at 20°C [W/( m*K )  :  210-230

Linear heat extension coefficient ( 20-100°C ) [1/K]  :  23,5*10-6

Physical properties of pure weld metal (Approx. values)

0,2 % yield strength [MPa]  :  20

Tensile strength Rm [MPa]  :  65

Elongation A5 ( L0=5d0 ) [%]  :  35

Test temperature [°C]  :  20

Welding position

PA, PB, PC, PF

Shielding gas

I1, I2, I3 (Argon, Helium or Argon/Helium-mixtures)

Polarity

MIG =+, TIG ~

Approvals

On request

Dimensions Ø

MIG-wires [mm]  :  0,8 ; 1,0 ; 1,2 ; 1,6 ; 2,0 ; 2,4

TIG-rods [mm]  :  1,6 ; 2,0 ; 2,4 ; 3,2 ; 4,0

Wire packagings

Spools  :  Packaging units

S 100 / 0,5 kg  :  20 spools = 10 kg (box)

S 200 / 2 kg  :  4 spools = 8 kg (box)

S 300 / 6 kg  :  84 spools = 504 kg (pallet)

B 300 / BS 300 / 7 kg  :  84 spools = 588 kg (pallet)

B 400 / 18 kg  :  28 spools = 504 kg (pallet)

B 400 / 40 kg  :  15 spools = 600 kg (pallet)

Conditionnement baguettes TIG

carton 10 kg  :  Length 1.000 mm

4043 aluminum GTAW (TIG) welding alloy is an all-position 5% silicon alloy used to weld heat-treatable base metals. It is most often used to weld the 6XXX series of alloys. The silicon addition improves puddle fluidity, producing an appealing bead profile. It is less crack sensitive on the 6XXX series than other welding alloys. It is qualified to AWS A5.10 ER4043, ABS, ISO Designation AlSi5. It is commonly used for welding automotive parts, truck trailers and repairing bicycles.

Features

Designed for welding heat treatable base alloys, specifically 6XXX series alloys

Lower melting point and more fluidity than the 5XXX series filler alloys

Low sensitivity to weld cracking with the 6XXX series base alloys

All position welding rod

Often used to for repair welding aluminum/silicon cast alloys such as grades 353/A356

Common choice for welding 6061

Gray (post anodized) color

Embossed on each end for easy identification after use

Hegesztőpálca AVI/TIG alumínium  AlMg5 (ER5356) 2,0x1000mm 5kg/csomag.  A termékek műbizonylattal rendelkeznek. Kérésre mellékeljük, vagy e-mailben rendelkezésre bocsájtjuk.

Alloy 5356 is an all position non-heat treatable TIG wire used to weld the 5XXX series alloys when 40,000 psi tensile strength is not a requirement. Alloy 5356 is a very good all purpose wire so it is the most widely used of all aluminum fillers metals.

Typical Application:  Common applications are welding of boats / ships, bicycles, tanks pressure vessels and automotive parts.

Chemical Composition AWS Commercial Specification

Si - 0.25%

Fe - 0.4%

Cu - 0.1%

Mn - 0.05-0.2%

Mg - 4.5-5.5%

Cr - 0.05-0.2%

Zn - 0.1%

Ti - 0.06-0.2%

Al - Rem%

Others - 0.15% AWS A5.10; ASME SFA 5.10; ISO 18273 UNS-A

4043 aluminum GTAW (TIG) welding alloy is an all-position 5% silicon alloy used to weld heat-treatable base metals. It is most often used to weld the 6XXX series of alloys. The silicon addition improves puddle fluidity, producing an appealing bead profile. It is less crack sensitive on the 6XXX series than other welding alloys. It is qualified to AWS A5.10 ER4043, ABS, ISO Designation AlSi5. It is commonly used for welding automotive parts, truck trailers and repairing bicycles.

Features

Designed for welding heat treatable base alloys, specifically 6XXX series alloys

Lower melting point and more fluidity than the 5XXX series filler alloys

Low sensitivity to weld cracking with the 6XXX series base alloys

All position welding rod

Often used to for repair welding aluminum/silicon cast alloys such as grades 353/A356

Common choice for welding 6061

Gray (post anodized) color

Embossed on each end for easy identification after use

Hegesztőpálca AVI/TIG alumínium  AlMg5 (ER5356) 3,2x1000mm 5kg/csomag.  A termékek műbizonylattal rendelkeznek. Kérésre mellékeljük, vagy e-mailben rendelkezésre bocsájtjuk.

Alloy 5356 is an all position non-heat treatable TIG wire used to weld the 5XXX series alloys when 40,000 psi tensile strength is not a requirement. Alloy 5356 is a very good all purpose wire so it is the most widely used of all aluminum fillers metals.

Typical Application:  Common applications are welding of boats / ships, bicycles, tanks pressure vessels and automotive parts.

Chemical Composition AWS Commercial Specification

Si - 0.25%

Fe - 0.4%

Cu - 0.1%

Mn - 0.05-0.2%

Mg - 4.5-5.5%

Cr - 0.05-0.2%

Zn - 0.1%

Ti - 0.06-0.2%

Al - Rem%

Others - 0.15% AWS A5.10; ASME SFA 5.10; ISO 18273 UNS-A

Hegesztőpálca AVI/TIG alumínium  AlMg5 (ER5356) 3,2x1000mm 5kg/csomag.  A termékek műbizonylattal rendelkeznek. Kérésre mellékeljük, vagy e-mailben rendelkezésre bocsájtjuk.

Alloy 5356 is an all position non-heat treatable TIG wire used to weld the 5XXX series alloys when 40,000 psi tensile strength is not a requirement. Alloy 5356 is a very good all purpose wire so it is the most widely used of all aluminum fillers metals.

Typical Application:  Common applications are welding of boats / ships, bicycles, tanks pressure vessels and automotive parts.

Chemical Composition AWS Commercial Specification

Si - 0.25%

Fe - 0.4%

Cu - 0.1%

Mn - 0.05-0.2%

Mg - 4.5-5.5%

Cr - 0.05-0.2%

Zn - 0.1%

Ti - 0.06-0.2%

Al - Rem%

Others - 0.15% AWS A5.10; ASME SFA 5.10; ISO 18273 UNS-A

Synergic

Hegesztőpálca AVI/TIG alumínium  AlMg5 (ER5356) 1,6x1000mm 5kg/csomag.  A termékek műbizonylattal rendelkeznek. Kérésre mellékeljük, vagy e-mailben rendelkezésre bocsájtjuk.

Alloy 5356 is an all position non-heat treatable TIG wire used to weld the 5XXX series alloys when 40,000 psi tensile strength is not a requirement. Alloy 5356 is a very good all purpose wire so it is the most widely used of all aluminum fillers metals.

Typical Application:  Common applications are welding of boats / ships, bicycles, tanks pressure vessels and automotive parts.

Chemical Composition AWS Commercial Specification

Si - 0.25%

Fe - 0.4%

Cu - 0.1%

Mn - 0.05-0.2%

Mg - 4.5-5.5%

Cr - 0.05-0.2%

Zn - 0.1%

Ti - 0.06-0.2%

Al - Rem%

Others - 0.15% AWS A5.10; ASME SFA 5.10; ISO 18273 UNS-A

Synergic

Hegesztőpálca AVI/TIG alumínium  AlMg5 (ER5356) 2,0x1000mm 5kg/csomag.  A termékek műbizonylattal rendelkeznek. Kérésre mellékeljük, vagy e-mailben rendelkezésre bocsájtjuk.

Alloy 5356 is an all position non-heat treatable TIG wire used to weld the 5XXX series alloys when 40,000 psi tensile strength is not a requirement. Alloy 5356 is a very good all purpose wire so it is the most widely used of all aluminum fillers metals.

Typical Application:  Common applications are welding of boats / ships, bicycles, tanks pressure vessels and automotive parts.

Chemical Composition AWS Commercial Specification

Si - 0.25%

Fe - 0.4%

Cu - 0.1%

Mn - 0.05-0.2%

Mg - 4.5-5.5%

Cr - 0.05-0.2%

Zn - 0.1%

Ti - 0.06-0.2%

Al - Rem%

Others - 0.15% AWS A5.10; ASME SFA 5.10; ISO 18273 UNS-A

Typical composition in %

Si <0,25

Fe <0,40

Cu <0,05

Mn <0,05

Mg <0,05

Zn <0,07

Be <0,0003

Ti 0,10-0,20

Others <0,03

Al min. 99,50

Classification

EN ISO 18273  :  S Al 1450 ( AI99,5Ti )

Matériel Nr  :  3.0805

Base materials

See table

Remarks

Welding of pure aluminium requires special precaution due to the narrow melting range in order to prevent hotcracking and porosity. This alloy replaces ML 1050. Consider the technological application reference.

Physical properties (Approx. values)

Electrical conductivity [S*m/mm2]  :  min.35

Heat conductivity at 20°C [W/( m*K )  :  210-230

Linear heat extension coefficient ( 20-100°C ) [1/K]  :  23,5*10-6

Physical properties of pure weld metal (Approx. values)

0,2 % yield strength [MPa]  :  20

Tensile strength Rm [MPa]  :  65

Elongation A5 ( L0=5d0 ) [%]  :  35

Test temperature [°C]  :  20

Welding position

PA, PB, PC, PF

Shielding gas

I1, I2, I3 (Argon, Helium or Argon/Helium-mixtures)

Polarity

MIG =+, TIG ~

Approvals

On request

Dimensions Ø

MIG-wires [mm]  :  0,8 ; 1,0 ; 1,2 ; 1,6 ; 2,0 ; 2,4

TIG-rods [mm]  :  1,6 ; 2,0 ; 2,4 ; 3,2 ; 4,0

Wire packagings

Spools  :  Packaging units

S 100 / 0,5 kg  :  20 spools = 10 kg (box)

S 200 / 2 kg  :  4 spools = 8 kg (box)

S 300 / 6 kg  :  84 spools = 504 kg (pallet)

B 300 / BS 300 / 7 kg  :  84 spools = 588 kg (pallet)

B 400 / 18 kg  :  28 spools = 504 kg (pallet)

B 400 / 40 kg  :  15 spools = 600 kg (pallet)

Conditionnement baguettes TIG

carton 10 kg  :  Length 1.000 mm

4043 aluminum GTAW (TIG) welding alloy is an all-position 5% silicon alloy used to weld heat-treatable base metals. It is most often used to weld the 6XXX series of alloys. The silicon addition improves puddle fluidity, producing an appealing bead profile. It is less crack sensitive on the 6XXX series than other welding alloys. It is qualified to AWS A5.10 ER4043, ABS, ISO Designation AlSi5. It is commonly used for welding automotive parts, truck trailers and repairing bicycles.

Features

Designed for welding heat treatable base alloys, specifically 6XXX series alloys

Lower melting point and more fluidity than the 5XXX series filler alloys

Low sensitivity to weld cracking with the 6XXX series base alloys

All position welding rod

Often used to for repair welding aluminum/silicon cast alloys such as grades 353/A356

Common choice for welding 6061

Gray (post anodized) color

Embossed on each end for easy identification after use

Hegesztő pálca AlMg4.5Mn (ER5183)