Iweld Kft.

Volfrám elektróda WL15 (arany) 3,2x175mm IW. 800CL32175

2.521 Ft

Kívánságlistára teszem

1,5% Lantán tartalmú volfrám elektródal.

ld.:

WL15 (GOLDplus®) electrode Ø3,2 x 175 mm

colour: GOLDplus®

Lantán elektróda, univerzálisan alkalmazható közel minden AVI/TIG eljárásnál.

ötvözetlen acélok

magasan ötvözött acélok

alumíniumötvözetek

titánötvözetek

nikkelötvözetek

rézötvözetek

magnéziumötvözeteknél.

A lantán elektródák felülmúlják a cériumos elektródákat az alacsony áramtartományban, ami azt jelenti, hogy a lantános elektródák a legjobb választás.

Ötvöző tartalom:

97.80% volfrám

1.30 – 1.70% Lantán

0.5% Egyéb

WL15 (GOLDplus®) electrode Ø3,2 x 175 mm

colour: GOLDplus®

QUALITY / FINISH

pickled:

Uniform matte appearance, free from impurities as a result of a chemically cleaned surface. Pickled surfaces exhibit increased emissivity. This means, for instance, that lower heating temperatures can be achieved in high-temperature applications while maintaining the same radiant power. Furthermore, the pickled surface should be preferred for all standard applications in which a bright finish is not absolutely necessary. It is the least expensive variant.

ground:

The appearance of ground sheets falls between that of bright and pickled sheets. They have a satin-like finish. The ground surface is a less expensive alternative to the bright surface and is suitable for all standard applications. It is possible to work to very narrow tolerances with rods that have a ground surface.

bright:

The mirror finish is visually appealing and exhibits a high level of reflectivity that can be of interest for certain applications (e.g. reflectors).

forged:

The marks of forging can still be seen. Matte appearance as a result of chemical cleaning. Least expensive surface finish: Can be used, for instance, in the glass industry with the benefits of reduced wear compared with machined surfaces.

turned:

Turned, uniform surface with a matte appearance. A measurable surface roughness and tolerances in the range of tenths of a millimeter are achieved.

electropolished:

Bright appearance. More material removed, resulting in reduced roughness; free from any impurities.